Normet Service Technician – Hydraulic and Electrical

Technicians with experience across electrical, mechanical and maintenance operations have an opportunity to consider the Normet Service Technician – Hydraulic and Electrical vacancy. The role is focused on maintaining equipment reliability through preventive maintenance, corrective actions, technical troubleshooting, maintenance planning and accurate reporting while operating within strict safety and quality requirements.

The position combines electrical, mechanical and hydraulic-related technical work with responsibilities such as risk assessments, shift reporting, incident reporting, root-cause analysis and continuous improvement. Experience supporting ECM (Emulsion Charging Module) operations is specifically identified as advantageous, making relevant mining or specialised equipment exposure potentially valuable for candidates who possess it.

Normet Service Technician Vacancy: Quick Overview

• Company: Normet
• Position: Service Technician – Hydraulic and Electrical
• Field: Technical Maintenance
• Focus: Hydraulic / Electrical / Mechanical
• Preventive maintenance: Required
• Corrective maintenance: Required
• Root cause analysis: Required
• Risk assessments: Required
• Shift reporting: Required
• Incident reporting: Required
• ECM operations support experience: Advantageous
• 5S housekeeping: Required
• Safety compliance: Required
• Continuous improvement: Required
• Qualifications: Not supplied
• Minimum years of experience: Not supplied
• Location: Not supplied
• Closing date: Not supplied
• Salary: Not supplied

About the Normet Service Technician Role

The Service Technician position covers three broad technical areas:

• Electrical operations
• Mechanical operations
• Maintenance operations

The successful candidate will support equipment and operations while ensuring work is completed according to established procedures, safety requirements and quality standards.

The vacancy requires a technician capable of contributing both practically and analytically to equipment maintenance.

Preventive Maintenance

Preventive maintenance is one of the core responsibilities.

The successful candidate will be involved in maintenance activities intended to identify and address potential problems before they result in equipment failure.

This includes supporting:

• Maintenance planning
• Maintenance preparation
• Execution of maintenance activities
• Monitoring of maintenance outcomes
• Documentation

The technician should therefore understand that maintenance doesn’t end when equipment is returned to operation.

Corrective Actions

When equipment problems or operational issues occur, the technician will perform appropriate:

Corrective actions.

The objective is to address technical problems and contribute to reliable equipment operation.

Candidates with genuine fault-finding, repair or breakdown-maintenance experience should make those capabilities visible on their CV.

Maintenance Planning and Preparation

The successful candidate will:

Support planning and preparation

for maintenance activities.

This indicates that the position isn’t purely reactive.

Effective maintenance requires preparation before technical work begins, followed by monitoring and documentation after work has been completed.

Monitoring Maintenance Outcomes

Normet also expects the Service Technician to:

Monitor outcomes.

The technician should therefore consider whether completed maintenance has successfully resolved the issue and whether additional action may be necessary.

This connects directly with the vacancy’s focus on:

• Root cause analysis
• Improvements
• Continuous improvement

Root Cause Analysis

The successful candidate will contribute to documenting:

Root cause analysis.

Instead of repeatedly correcting the symptoms of a technical problem, root cause analysis aims to understand why the problem occurred.

Candidates with experience investigating recurring equipment failures should highlight this in their application.

Maintenance Documentation

Technical activities and their outcomes need to be properly documented.

The supplied responsibilities specifically refer to documentation covering:

• Outcomes
• Root causes
• Improvements

Candidates should therefore be comfortable with the administrative and reporting responsibilities that accompany practical maintenance work.

ECM Operations Support

Normet states that:

ECM (Emulsion Charging Module) operations support experience is advantageous.

The word “advantageous” is important.

Candidates shouldn’t automatically interpret previous ECM experience as a mandatory minimum requirement based on the supplied information.

However, applicants who genuinely have ECM operations or support experience should make it highly visible on their CV because it is directly relevant to the vacancy.

Risk Assessments

The Service Technician will conduct:

Risk Assessments.

This reinforces the importance of identifying hazards before or during technical work and ensuring maintenance activities are completed safely.

Applicants with experience conducting technical or workplace risk assessments should include this where applicable.

Shift Reporting

The position requires:

Shift Reporting.

Candidates should therefore be comfortable documenting and communicating relevant operational information between shifts or to appropriate stakeholders.

Accurate reporting can help ensure technical issues aren’t lost between teams or working periods.

Incident Reporting

The successful candidate will also be responsible for:

Incident Reporting.

This means incidents must be properly recorded and communicated according to applicable procedures.

The role therefore requires good technical communication and disciplined documentation.

Standard Operating Procedures

All work must be completed according to:

Standard Operating Procedures.

The technician must be able to follow established processes rather than improvising technical activities that could compromise safety, equipment reliability or operational standards.

Key Performance Indicators

The position includes responsibility for the:

Achievement of Key Performance Indicators.

Candidates should therefore expect their performance to be measured against defined operational or maintenance objectives.

The supplied information doesn’t specify the individual KPI targets, so these shouldn’t be invented.

Quality Standards

Normet requires the successful technician to:

Follow quality standards.

Maintenance work must therefore meet applicable technical and operational requirements rather than simply returning equipment to service as quickly as possible.

Quality and equipment reliability need to be considered alongside productivity.

Safety Standards

Safety is a significant part of the position.

The successful candidate must:

• Follow safety standards
• Comply with safe operating practices
• Conduct risk assessments
• Report incidents
• Maintain appropriate housekeeping

Candidates should be able to demonstrate a strong safety mindset within technical environments.

Operational Communication

The Service Technician must communicate:

Operational status and any deviations.

This requires the ability to clearly communicate when equipment or operations aren’t performing according to expected conditions.

Potential problems shouldn’t simply be observed and ignored.

They need to be escalated or communicated appropriately.

5S and Housekeeping

Normet specifically refers to:

Safety and housekeeping (5S) requirements.

5S principles support an organised, efficient and safer technical working environment.

Candidates with previous 5S experience in workshops, plants, mining operations or maintenance environments should include it where relevant.

Continuous Improvement

The successful candidate will contribute to:

Continuous improvement and development on a personal and operational level.

This includes learning from maintenance outcomes and identifying ways of improving equipment or operational performance.

The technician is also expected to continue developing their own technical capabilities.

Who Should Apply?

Based on the supplied responsibilities, this vacancy may be relevant to candidates with experience or skills involving:

• Electrical maintenance
• Mechanical maintenance
• Hydraulic systems
• Preventive maintenance
• Corrective maintenance
• Equipment fault finding
• Maintenance planning
• Root cause analysis
• Technical reporting
• Risk assessments
• Incident reporting
• Standard operating procedures
• 5S
• Quality standards
• Safe working practices

Candidates with ECM operations support experience may have an additional advantage.

Thabang’s Tip

Don’t make the mistake of turning missing information into requirements.

The supplied vacancy information gives us a detailed picture of the technical responsibilities, but it doesn’t provide the actual minimum qualification or years-of-experience requirements. So don’t assume that candidates need an N3, N4, Trade Test, Red Seal or a particular number of years of experience unless Normet states this elsewhere in the full advert.

What we can see clearly is that Normet wants someone with a strong maintenance mindset. Your CV should demonstrate genuine experience with preventive maintenance, corrective actions, fault finding, root-cause analysis, risk assessments and technical reporting.

And if you’ve worked with an ECM (Emulsion Charging Module), don’t bury that experience. Normet specifically identifies ECM operations support as advantageous, so directly relevant exposure deserves a prominent position in your technical experience.

How to Apply for the Normet Service Technician Vacancy

Candidates should apply through the official recruitment channel associated with the Normet Service Technician – Hydraulic and Electrical vacancy.

Before submitting your application, make sure your CV clearly reflects relevant experience with:

• Electrical systems
• Hydraulic systems
• Mechanical maintenance
• Preventive maintenance
• Corrective maintenance
• Fault finding
• Maintenance planning
• Root cause analysis
• Technical documentation
• Risk assessments
• Shift reporting
• Incident reporting
• 5S practices
• Safety and quality standards
• ECM operations, where applicable

No qualification requirement, minimum years of experience, location, closing date, driver’s licence requirement, salary or direct application link was included in the supplied information. These details shouldn’t be invented.

For technicians with relevant maintenance experience, the Normet Service Technician role offers a technically focused environment combining electrical, mechanical and hydraulic maintenance with preventive maintenance, corrective actions, root-cause analysis, safety management and continuous operational improvement.

Closing Date: 09 October 2026

Disclaimer

CareersPursuit shares publicly available opportunities for informational purposes only and is not affiliated with the companies or organisations mentioned unless explicitly stated otherwise. Do not send your personal information, CV, or applications directly to CareersPursuit. Always verify opportunity details through official channels before applying.

Apply For The Normet Service Technician