Samancor Maintenance Artisan Diesel Mechanic

Qualified Diesel Mechanics with experience maintaining heavy mobile equipment can apply for the Samancor Maintenance Artisan Diesel Mechanic vacancy. The position is responsible for carrying out preventive maintenance, repairs, inspections and breakdown work on Trackless Mobile Machinery while ensuring that all work is completed safely and according to documented maintenance instructions.

Applicants need Grade 12 or N2, a relevant Trade Test under Section 26D or Section 13, and three years of experience. The role requires practical fault-finding ability across hydraulic systems, internal combustion engines, transmissions and drive lines, together with basic electrical fault finding on circuits below 24V.

Samancor Maintenance Artisan Diesel Mechanic: Quick Overview

• Company: Samancor
• Position: Maintenance Artisan Diesel Mechanic
• Minimum qualification: Grade 12 / N2
• Trade Test: Required
• Trade Test requirement: Section 26D or Section 13
• Experience: 3 years
• Trackless Mobile Machinery: Central to the role
• Preventive maintenance: Required
• Breakdown maintenance: Required
• Hydraulic fault finding: Required
• Internal combustion engines: Required
• Transmission fault finding: Required
• Drive-line fault finding: Required
• Basic electrical fault finding: Below 24V
• Isolation and lockout: Part of the role
• Rotables management: Part of the role
• Closing date: Not supplied
• Salary: Not supplied
• Location: Not supplied

Purpose of the Position

The purpose of the job is to:

Safely carry out preventive maintenance and repairs on Trackless Mobile Machinery in line with documented work instructions.

This is a qualified artisan position focused on maintaining mobile mining equipment and responding to both planned and unplanned maintenance requirements.

Minimum Qualifications

Applicants need:

• Grade 12 / N2
• Relevant Trade Test Section 26D or Section 13

Unlike some artisan vacancies requiring several additional technical qualifications, the supplied requirements specifically identify Grade 12/N2 and the relevant Trade Test.

Trade Test Requirement

Candidates must hold a relevant:

Section 26D or Section 13 Trade Test.

This means the position is intended for qualified artisans rather than candidates seeking a Diesel Mechanic apprenticeship.

Applicants should make their Trade Test qualification clearly visible on their CV.

Experience Required

Samancor requires:

Three years’ experience.

No further breakdown of the experience requirement is provided in the supplied vacancy.

However, candidates with experience involving diesel equipment, Trackless Mobile Machinery and industrial or mining maintenance should clearly describe that relevant exposure on their CV.

Trackless Mobile Machinery Maintenance

The Diesel Mechanic will perform preventive maintenance and repairs on:

Trackless Mobile Machinery.

Candidates with relevant experience should identify the actual machinery they have worked on rather than simply writing “TMM experience.”

This can help recruiters understand the extent of the candidate’s practical maintenance background.

Preventive Maintenance

The successful candidate will perform maintenance according to:

• Work Orders
• Detailed Task Lists
• Documented work instructions

Samancor specifically states that employees must never hand over equipment that has been:

Inappropriately maintained.

Maintenance quality and equipment safety are therefore fundamental responsibilities.

Work Must Be Authorised

The Diesel Mechanic must:

Never do a job without receiving authorization in the form of a notification of a work order.

This means maintenance activities need to follow Samancor’s established maintenance-management processes rather than being performed informally.

Work Orders and Maintenance Records

The successful candidate will:

• Perform jobs according to Work Orders
• Follow detailed Task Lists
• Capture maintenance history
• Complete notifications
• Confirm Work Orders
• Record the correct time
• Capture all required maintenance details

Candidates therefore need to combine hands-on mechanical ability with accurate maintenance administration.

Hydraulic Fault Finding

One of the core technical responsibilities is:

Fault finding on hydraulic systems.

Hydraulic systems are widely used on Trackless Mobile Machinery, making this an important technical competency for the position.

Candidates with genuine hydraulic troubleshooting and repair experience should make it prominent on their CV.

Internal Combustion Engines

The Diesel Mechanic will conduct fault finding on:

Internal combustion engines.

Candidates should therefore have practical knowledge of engine systems and be able to diagnose problems affecting equipment performance.

Transmissions and Drive Lines

Fault finding also extends to:

• Transmissions
• Drive lines

This demonstrates the broad mechanical scope of the position.

Candidates should be comfortable diagnosing problems across the major mechanical systems used on mobile equipment.

Basic Electrical Fault Finding

Although this is primarily a Diesel Mechanic position, candidates will also conduct:

Basic fault finding on electric circuits under 24V.

This adds a basic auto-electrical component to the job.

The supplied description doesn’t require the candidate to perform the broader electrical and electronic work expected from the Auto Electrician position.

Assessing Machine Condition

The successful candidate is expected to:

Use own judgment to assess machines from a maintenance point of view and conduct own maintenance.

This is important because it indicates that Samancor expects more than simply following instructions.

The qualified artisan must be capable of assessing equipment condition and applying appropriate maintenance judgement.

Machine Inspections

The Diesel Mechanic will:

Generate notifications from inspections and subsequent notifications.

Problems identified during inspections therefore need to be formally recorded and followed through the maintenance system.

Tyre Changes

The successful candidate will also:

Assist in tyre changes.

Candidates should be prepared for a broad range of practical activities associated with maintaining Trackless Mobile Machinery.

Breakdown Maintenance

Unplanned equipment failures form another important part of the position.

The Diesel Mechanic must:

Attend to breakdowns quickly and safely.

This balance is important. Equipment needs to be returned to service efficiently, but safety procedures can’t be bypassed simply to reduce downtime.

Root-Cause Information

When a stoppage occurs, the artisan must:

Capture all data related to the stoppage to aid in determining the root cause.

Candidates therefore need to document what happened rather than simply repairing the equipment and moving on.

Accurate breakdown information can help identify recurring failures and improve future maintenance.

Improving Breakdown Response

The Diesel Mechanic will communicate ways of improving how a breakdown was handled to the:

Maintenance Supervisor (Trackless).

This introduces a continuous-improvement element to the position.

Isolation and Lockout

The successful candidate must:

• Perform isolation
• Issue lockout documents

These requirements form part of the safe execution of maintenance activities.

Candidates with practical experience in isolation and lockout procedures should clearly reflect this in their CV.

SHEQ Requirements

The successful candidate must comply with:

Safety, Health, Environment and Quality (SHEQ) requirements.

This includes ensuring that equipment isn’t handed back in an improperly maintained condition and that work isn’t performed without the appropriate authorisation.

Within a mining maintenance environment, technical competence and safe working practices need to operate together.

Reporting Maintenance Differences

If the actual maintenance requirements differ from the original task instruction, the artisan must provide feedback to the:

Maintenance Supervisor (Trackless).

The Diesel Mechanic must also communicate when work can’t be completed because:

• Spares aren’t available
• Equipment isn’t available
• Other factors prevent the job from being completed

Rotables Management

The position also involves rotables management.

Responsibilities include:

• Changing out items
• Creating PM orders
• Detailing items to be drawn from stock
• Creating reservations for rotables on PM Orders
• Creating subsequent notifications
• Completing Damage Tags
• Returning items to the rotable store
• Physically transporting damaged rotables to the lay-down area

The role therefore combines physical maintenance work with equipment and maintenance-system administration.

Who Should Apply?

The Samancor Maintenance Artisan Diesel Mechanic vacancy may suit candidates who:

• Have Grade 12 or N2
• Hold a relevant Section 26D or Section 13 Trade Test
• Have three years of experience
• Have Trackless Mobile Machinery maintenance experience
• Can troubleshoot hydraulic systems
• Understand internal combustion engines
• Can diagnose transmission problems
• Understand drive-line systems
• Can perform basic electrical fault finding below 24V
• Understand preventive maintenance
• Can respond safely to breakdowns
• Understand isolation and lockout procedures
• Can accurately complete Work Orders and maintenance records
• Can independently assess machinery from a maintenance perspective

Thabang’s Tip

For this vacancy, your CV needs to show that you’re more than a general Diesel Mechanic. The job specifically centres on Trackless Mobile Machinery, so make your relevant heavy-equipment experience easy for the recruiter to find.

If you’ve genuinely worked on TMM, identify the types of machines you’ve maintained and explain your experience with hydraulics, diesel engines, transmissions, drive lines, preventive maintenance and breakdown fault finding.

There’s also an important electrical element: Samancor expects the Diesel Mechanic to perform basic electrical fault finding on circuits below 24V. If you have legitimate experience diagnosing basic electrical problems on diesel equipment, include it.

Finally, don’t underestimate the administrative side of the job. Work Orders, maintenance history, notifications, stoppage data and rotables management all form part of the position. A good artisan in this environment needs to repair the machine and document the work properly.

How to Apply for the Samancor Maintenance Artisan Diesel Mechanic Vacancy

Candidates should apply through the official recruitment channel associated with the Samancor Maintenance Artisan Diesel Mechanic vacancy.

Before applying, ensure your CV clearly reflects:

• Grade 12/N2
• Relevant Trade Test
• Section 26D or Section 13 qualification
• Three years of experience
• Trackless Mobile Machinery experience
• Hydraulic fault finding
• Internal combustion engine maintenance
• Transmission experience
• Drive-line experience
• Basic electrical fault finding below 24V
• Preventive maintenance
• Breakdown maintenance
• Isolation and lockout experience
• Work Order or maintenance-system experience

No closing date, exact work location, remuneration or direct application procedure was included in the supplied information, so these details shouldn’t be invented.

For qualified Diesel Mechanics with relevant experience, the Samancor Maintenance Artisan Diesel Mechanic vacancy offers a hands-on mining maintenance role focused on keeping Trackless Mobile Machinery safe, reliable and operational through preventive maintenance, fault finding and effective breakdown response.

Closing Date: 07/10/226

Disclaimer

CareersPursuit shares publicly available opportunities for informational purposes only and is not affiliated with the companies or organisations mentioned unless explicitly stated otherwise. Do not send your personal information, CV, or applications directly to CareersPursuit. Always verify opportunity details through official channels before applying.

Apply For The Samancor Maintenance Artisan