Transnet Master Installation Electrician Vacancy

Electrical safety, compliance and reliable equipment maintenance are critical to the safe operation of petroleum pipeline infrastructure. Transnet Pipelines is seeking a suitably qualified Master Installation Electrician to oversee electrical installations, inspections, maintenance and high-voltage equipment across its operations.

This is a specialised technical opportunity for an experienced electrical professional with the required trade background, practical experience and registration as a Master Installation Electrician. The role carries significant responsibility, including issuing Certificates of Compliance (COCs), supervising electrical work, maintaining hazardous-area equipment and ensuring that electrical installations meet applicable safety and compliance requirements.

Applicants should carefully review the extensive technical, training, certification and competency requirements before applying.

About the Transnet Master Installation Electrician Vacancy

The Master Installation Electrician must be registered under Regulation 9 and approved by the Chief Inspector to verify and certify the construction, testing and inspection of electrical installations.

The role supports the safe and effective custody, transfer and transportation of petroleum products through Transnet Pipelines.

Working in liaison with the Operations, Instrumentation and Mechanical departments, the successful candidate will be responsible for electrical scheduling, inspections and maintaining safe working conditions.

This position requires an individual who can work independently, understand the electrical equipment used across Transnet Pipelines and ensure that installations and equipment comply with relevant requirements.

Qualifications and Experience Requirements

The advert specifies the following essential requirements:

• Electrical Trade Test, with three years specified in the qualification and experience section.
• Three years of technical/electrical on-the-job experience.
• Adequate knowledge of electrical equipment used within Transnet Pipelines to work independently.
• Qualification and accreditation required to register as a Master Installation Electrician with the Department of Labour.
• Two years of on-the-job training and exposure, followed by final accreditation.
• Practical experience and training at depots in the relevant region until the candidate is passed out.
• Computer literacy.
• SAP Plant Maintenance course covering MM and IM modules.
• Knowledge of purchasing and inventory processes.
• Proficiency in Microsoft Word and Excel.
• High Voltage Safety Instructions (A-Brown).

The advert also lists a Code 8 driver’s licence, Wireman’s Licence and Explosion Protection for Plant Maintenance Technicians (electrical and instrumentation).

Important: The supplied requirements describe the Master Installation Electrician registration and accreditation process alongside the experience and training requirements. Applicants should confirm the precise registration status and accreditation expected for appointment with Transnet.

Additional Courses and Technical Training

The vacancy lists several courses and training areas relevant to the role.

These include:

• NOSA Safety Course.
• Fire Fighting.
• Oil Spill Course.
• First Aid Level 2.
• Rotork Actuator Course covering A-Range, IQT and IQ-Range.
• Electrical Motor Course.
• High Tension (HT) Transformer Course.
• Working in Confined Spaces.
• Crossings and Cathodic Protection Basic Course.
• Theory and Operations Course.
• High Voltage Safety Instructions (A-Brown).
• SAP Plant Maintenance training covering MM and IM modules.
• Explosion Protection for Plant Maintenance Technicians (electrical and instrumentation).

The advert also refers to practical depot training, during which the successful candidate must gain experience and be passed out on the relevant depot or manifold.

A refresher course and testing are required every two years, followed by recertification every two years.

Key Duties and Responsibilities

The Master Installation Electrician will perform a broad range of electrical, maintenance, inspection, compliance and administrative duties.

1. Certificate of Compliance Management

The successful candidate will manage Certificates of Compliance (COCs) by:

• Conducting periodic inspections and issuing COCs in accordance with National Codes and the Occupational Health and Safety Act.
• Conducting compulsory two-year OHS Act inspections of hazardous-area equipment.
• Maintaining depot COCs.
• Ensuring compliance of electrical equipment installed in hazardous areas.

2. Electrical Installation Guidance and Oversight

• Provide guidance on electrical installations.
• Oversee electrical installation work.
• Ensure electrical work is carried out correctly and safely.

3. Equipment Integrity

• Maintain the integrity of electrical equipment.
• Ensure the correct electrical equipment is selected and applied within the plant and operations.

4. Preventative Maintenance

• Perform preventative maintenance on electrical equipment.
• Detect, repair and report minor defects.
• Report major defects to support reliable and continuous pipeline operations.
• Maintain equipment such as 220V–3.3 kV motors, control gear and trip protection equipment, including actuators.

5. Defect Identification and Repairs

• Identify, analyse and repair defects on installed equipment.
• Conduct diagnostic tests to locate faults and carry out repairs.
• Read and interpret electrical schematics and reports.

Examples of equipment mentioned include mainline motor starters, trip protection systems, 380V panel starters and associated protection equipment.

6. Bonding

• Witness bonding installations.
• Carry out bonding installations.

7. Removal and Replacement of Installed Equipment

The role involves planning and carrying out the removal and replacement of installed equipment.

This includes:

• Planning the complete installation and isolation process.
• Removing existing equipment.
• Preparing and installing replacement equipment.
• Energising and testing equipment to confirm correct operation.

Examples include main motors, actuators, lights, cranes, enclosures, isolators and stop/start stations.

8. Refurbishment and Modification of Electrical Equipment

• Disassemble equipment.
• Replace defective components.
• Reassemble and test equipment according to manufacturer specifications.
• Certify refurbished equipment.

Examples include starters and actuators.

9. High-Voltage Equipment

The successful candidate will be responsible for high-voltage switching, maintenance and safety-related activities.

Duties include:

• Obtaining authorisation to undertake switching (A-Brown) and earthing on high-voltage switchgear and equipment up to 132 kV.
• Issuing work and test permits.
• Performing maintenance on high-voltage equipment.
• Supervising unauthorised personnel in substations and high-tension yards.
• Working to the clearance requirements for live high-voltage equipment in accordance with electrical high-voltage instructions.

10. Safety Responsibilities

• Attend safety meetings.
• Conduct safety inspections.
• Use appropriate safety equipment.
• Ensure equipment complies with flameproof safety requirements and standards.
• Assist with job observations.
• Supervise personnel where required.

11. Administration and Reporting

The position also involves effective management of administrative responsibilities, including:

• Preparing defect and inspection reports.
• Obtaining and cancelling electrical hot-work permits.
• Completing and managing job cards.
• Operating SAP modules, including MM and IM.
• Maintaining records, registers and COCs in accordance with applicable legislation.
• Assisting with internal electrical audits.
• Acting as an Electrical Supervisor when required.

Competencies and Skills

Transnet identifies the following competencies for the position:

• Computer literacy.
• SAP Plant Maintenance (SAP_PM) literacy.
• Knowledge of applicable tools and equipment.
• Knowledge of Code of Practice 29.
• Leadership skills.
• Communication skills.
• Ability to work as part of a team.
• Problem-solving abilities.
• Root cause analysis.
• Interpersonal skills.
• Basic knowledge and application of the Occupational Health and Safety Act.

Who Should Apply?

This vacancy is suited to experienced electrical professionals with the technical knowledge and practical background required to oversee electrical installations and maintenance in a demanding industrial environment.

Applicants should be able to demonstrate experience in electrical maintenance, equipment inspections, fault finding, high-voltage systems, preventative maintenance and safety compliance.

The position is particularly specialised because it involves hazardous-area equipment, petroleum pipeline infrastructure and high-voltage equipment up to 132 kV.

Candidates should carefully compare their qualifications, trade experience, registration and training records against the full requirements before applying.

This is a specialised electrical position, so a general electrician CV may not adequately demonstrate your suitability. Make sure your application clearly identifies your trade qualifications, Master Installation Electrician registration and accreditation, practical experience and relevant safety training.

Pay particular attention to high-voltage switching, hazardous-area inspections, COC management, AC and electrical equipment maintenance, SAP MM/IM and root cause analysis. Where you have experience with equipment such as actuators, motors, starters, cranes and transformers, describe the work you have performed rather than simply listing the equipment.

Because the role carries significant legal and safety responsibilities, ensure that your registration and certification details are accurate and up to date.

Closing Date: 09/11/2026

Disclaimer

CareersPursuit shares publicly available opportunities for informational purposes only and is not affiliated with the companies or organisations mentioned unless explicitly stated otherwise. Do not send your personal information, CV, or applications directly to CareersPursuit. Always verify opportunity details through official channels before applying.

Apply For The Transnet Master Installation Electrician